Go Back   Subaru Impreza Forum - WRX STI Rally Performance Tuning > Subaru Impreza Technical Area > Technical General

Subaru Impreza Forum

Prodrive Geometry settings... HERE
LinkBack Thread Tools Display Modes
Old 03 Jan 2005, 08:47 PM   #1 (permalink)
Obsessed Scooby
Paid & Proud
PeterUK300's Avatar
Join Date: Apr 2004
Location: East Herts
Posts: 12,081
Prodrive Geometry settings... HERE

Hi All
A bit of useful info I found on NASIOC posted by Simon Lines of PRODRIVE
Originally I used to recommend the same settings that we use in the UK,

For a DCCD-A car: -

Front Camber (make sure it's equal side to side)

Minimum -1 10 Preferred -1 15 "Track" -1 20 / -1 30

Front Toe-in (Total) Minimum 0 02 Preferred 0 06 Maximum 0 10

Front Caster Standard Subaru (more is good)

Rear Camber Standard Subaru (make equal side to side if at all possible)

Rear Toe-in (Total) Minimum 0 06 Preferred 0 10 Maximum 0 14

Thrust angle Minimum -0 01 Preferred 0 00 Maximum 0 01

Non DCCD-A car is the same accept: -

Front Toe-in (Total) Minimum 0 00 Preferred 0 01 Maximum 0 03

Rear Toe-in (Total) Minimum 0 02 Preferred 0 6 Maximum 0 10

These settings do fall into the stock Subaru "envelope" hence the recommendation that you "use stock settings" they are also conservative settings that are designed not to cause to much tire wear.

However, these are UK based setting's and they will reduce understeer, so in effect making the car more suited to a competent driver. They are NOT mine or Prodrive's recommendation for use in the USA

The following is the UK (United Kingdom) Fitting Procedure for the WR Sport Spring Package WRX03

1. Remove the front and rear struts and fit the road springs and re-assemble as per the workshop manual.

Note - Use of the official Subaru workshop manual!

2. The tyre pressures and suspension geometry MUST be set correctly to achieve the full benefit of the spring package. It is also important to settle the suspension so the geometry is set at the correct ride height.

a) Set the tyre pressures to:

Front 2.3 bar (33 psi)
Rear 2.2 bar (32 psi)

b) Settle the suspension by driving a few miles on the road.

c) Set the geometry to the prodrive settings

(as reproduced above)

3. Check the headlight alignment and reset if necessary as per the workshop manual.

Again this is the UK version and in no way a recomendation as to what you should be doing in the USA

If you have never had track experience, proper driver training (having a US driving licence does NOT constitute "proper driver training") and are an inexperienced driver you should as a matter of course enroll onto some kind of advanced driver training course.

It remains unfortunate that as it has already been said "Americans can't be counted on taking responsibility for anything these days" this (thankfully) is not 100% true, however the % that do think like this kind of ruin things for the % that don't...


All the best

Offline   Reply With Quote
Old 08 Oct 2011, 01:21 AM   #2 (permalink)
Young Scooby
Join Date: Aug 2008
Location: Mid Devon
Posts: 95
Re: Prodrive Geometry settings... HERE

Thanks bud, much appreciated
Offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
WRSport pricing advice please. Stormmy Subaru Impreza Discussions 2 15 Feb 2008 02:16 PM
Posted as requested by Prodrive skylight National Meetings and Track Days 12 29 May 2007 05:04 PM
Anyone ever removed Prodrive suspension upgrades. abaddon Technical General 0 20 Nov 2005 11:07 PM
Privateer Grp N Prodrive Rally Car in BRC 2005 ! scoobyslut Subaru Impreza Discussions 1 20 Jan 2005 09:04 PM

All times are GMT. The time now is 03:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.