Go Back   Subaru Impreza Forum - WRX STI Rally Performance Tuning > Subaru Impreza Technical Area > Technical General

Subaru Impreza Forum

Why oils lose viscosity with use
Reply
 
LinkBack Thread Tools Display Modes
Old 18 Oct 2005, 10:12 PM   #1 (permalink)
Cool Scooby
 
oilman's Avatar
 
Join Date: Nov 2004
Location: South West
Posts: 382
Why oils lose viscosity with use

Viscosity Index Improvers.

An oils viscosity will decrease as the engine temperature rises. Viscosity Index Improvers are added to reduce this thinning. They are a key addative in the production of multigrade oils.

VI Improvers are heat sensitive long chain, high molecular weight polymers that minimise the viscosity loss of the oil at high temperatures. They work like springs, coiled at low temperatures and uncoiling at high temperatures. This makes the molecules larger (at high temps) which increases internal resistance within the thinning oil. They in effect "fight back" against the viscosity loss in the oil.

"Shearing"

The long chain molecules in VI Improvers are prone to "shearing" with use which reduces their ability to prevent the oil from losing viscosity. This "shearing" occurs when shear stress ruptures the long chain molecules and converts them to shorter, lower weight molecules. The shorter, lower weight molecules offer less resistance to flow and their ability to maintain viscosity is reduced.

This shearing not only reduces the viscosity of the oil but can cause piston ring sticking (due to deposits), increased oil consumption and increased engine wear.

Like basestock quality, VI Improvers also vary in quality. As with many items the more you pay, the better the finished article and more expensive, usually synthetic oils are likely to incorporate better VI improvers. All other things being equal the less VI improver an oil contains, the better it will stay in grade by resisting viscosity loss.

Which oils require more VI Improvers?

There are two scenarios where large amounts of these polymers are required as a rule.

Firstly in "wide viscosity span" multigrades. By this I mean that the difference between the lower "W" number and the higher number is large for example 5w-50 (diff 45) and 10w-60 (diff 50) are what is termed as "wide viscosity span" oils.

Narrow viscosity oils like 0w-30 (diff 30) or 5w-40 (diff 35) require far less VI Improvers and therefore are less prone to "shearing".

Secondly, mineral and hydrocracked (petroleum synthetic oils) require
more VI Improvers than proper PAO/Ester (Group IV or V) synthetic oils
as they have a higher inherent VI to begin with, this is due to
differences in the molecular straucture of the synthetic base oils
compared to mineral oils

It is a fact that many synthetics require significantly less VI Improver to work as a multigrade and are therefore less prone to viscosty loss by shearing.

Cheers
Simon
__________________
Use the code SUBIMP and get 10% Club Discount
email: sales@opieoils.co.uk - phone: 01209 202944
Offline   Reply With Quote
Old 19 Oct 2005, 06:54 AM   #2 (permalink)
Obsessed Scooby
Paid & Proud
 
PeterUK300's Avatar
 
Join Date: Apr 2004
Location: East Herts
Posts: 12,081
Simon
Thanks m8, interesting reading.
You are as informative as ever.
__________________
All the best
Pete

http://www.scoobyweb.co.uk
Offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gear oil F.A.Q'S oilman Technical General 19 10 Mar 2016 02:21 PM
Oil advice and recommendations here oilman Engine Bay 479 13 Nov 2014 01:47 PM
16 important OIL questions and answers oilman Technical General 0 23 Jan 2008 03:31 PM
Buying Oil, Some Basic Advice From Opie Oils oilman Technical General 1 11 May 2007 03:18 PM
Clarification on a common misconception (oil viscosity) oilman Technical General 14 17 May 2005 09:38 AM


All times are GMT. The time now is 03:50 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.