Go Back   Subaru Impreza Forum - WRX STI Rally Performance Tuning > Subaru Impreza Technical Area > Modifications - Tips and Tricks

Subaru Impreza Forum

anybody intrested in a remap/dyno run
Reply
 
LinkBack Thread Tools Display Modes
Old 30 Jun 2010, 07:36 PM   #1 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
anybody intrested in a remap/dyno run

Im taking my car to a Guy called Jayson who runs Chips uk.

He has a 1400 bhp 4 wheel drive rolling road and has mapped me 3 previous cars, hence the reason im using him again as he has one an excellent job on all 3, is anybody intrested in doing a Dyno Day as we can get discount by having a few cars going.

Last time i had a celica GT4 and i went down with vectra v6 onwners club and we got 10 cars at 200 each fully custom mapped on dyno. ( i was impresssed with my 267bhp increased to around 320bhp)

My Remap is costing 350 this time round which includes launch control etc, just though we may be able to get some group discount if we can get a few mapping and a few pwer runs also

If anybody is intrested message up on here
Offline   Reply With Quote
Old 30 Jun 2010, 07:44 PM   #2 (permalink)
Fresh Scooby
 
Join Date: Aug 2008
Posts: 2
Re: anybody intrested in a remap/dyno run

Quote:
Originally Posted by dukey1234 View Post
Im taking my car to a Guy called Jayson who runs Chips uk.

He has a 1400 bhp 4 wheel drive rolling road and has mapped me 3 previous cars, hence the reason im using him again as he has one an excellent job on all 3, is anybody intrested in doing a Dyno Day as we can get discount by having a few cars going.

Last time i had a celica GT4 and i went down with vectra v6 onwners club and we got 10 cars at 200 each fully custom mapped on dyno. ( i was impresssed with my 267bhp increased to around 320bhp)

My Remap is costing 350 this time round which includes launch control etc, just though we may be able to get some group discount if we can get a few mapping and a few pwer runs also

If anybody is intrested message up on here
were abouts is it mate so i know if its to far to travel,cheers
Offline   Reply With Quote
Old 30 Jun 2010, 10:42 PM   #3 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

Engine Tuning Specialists - Power | Economy | Quality | Viezu Approved Dealer*Chipped UK

This is the website
Offline   Reply With Quote
Old 30 Jun 2010, 10:43 PM   #4 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

This is the Address

Sugarbrook Rd
Bromsgrove, Worcestershire B60 3, UK
Offline   Reply With Quote
Old 30 Jun 2010, 10:44 PM   #5 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

its a fair treck for me from barnsley south yorks but, i trust Jay the mapper so its worth it
Offline   Reply With Quote
Old 01 Jul 2010, 11:38 AM   #6 (permalink)
Super Moderator
Paid & Proud
 
Tidgy's Avatar
 
Join Date: Apr 2006
Location: Nottingham
Posts: 18,743
Re: anybody intrested in a remap/dyno run

has he mapped scoobs before? what software is he using to do it?
__________________
PM, Squirrels best friend, cream egg king and resident .org spam tart/Perv
Offline   Reply With Quote
Old 01 Jul 2010, 12:07 PM   #7 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

Quote:
Originally Posted by Tidgy View Post
has he mapped scoobs before? what software is he using to do it?
He has mapped my old impreza, and yes he has done plenty of scoobies before. When i rang over my purple wagon in my pics he knew staright away he couldnt do it as it was non mappable ecu 98 model.

Il find out what software later il call him and find out and post up later,

I am very picky on who touches my car, he really knows what he is doing. When he mapped my celica nobody else would touch it they said they didnt know how to do it and Jay knew straight away. Apparantly there isnt a wasnt a cable available at the time to connect to celica ecu with it been an import so he had wires pushed into my port and made up his own cable while i waited and did an amazing job of mapping it.

I can definetly vouch for his knowledge and skills in mappping, for my 200 i got a run on dyno, remap, second run on dyno another tweak another run another tweak and a third and final run on dyno.
Offline   Reply With Quote
Old 01 Jul 2010, 12:08 PM   #8 (permalink)
Veteran Scooby
 
bugeye_bob's Avatar
 
Join Date: Mar 2009
Location: UK-Earth - Search google maps for "The Stig"
Posts: 4,563
Re: anybody intrested in a remap/dyno run

I know Jay very well, we go back a few years I was around when he first ordered his rolling road, he was always mapping boats back then though.
__________________
-- .. ... ... .. -. --. / -... ..- - / -. --- - / ..-. --- .-. --. --- - - . -.
Offline   Reply With Quote
Old 01 Jul 2010, 12:12 PM   #9 (permalink)
Super Moderator
Paid & Proud
 
Tidgy's Avatar
 
Join Date: Apr 2006
Location: Nottingham
Posts: 18,743
Re: anybody intrested in a remap/dyno run

Quote:
Originally Posted by dukey1234 View Post
He has mapped my old impreza, and yes he has done plenty of scoobies before. When i rang over my purple wagon in my pics he knew staright away he couldnt do it as it was non mappable ecu 98 model.

Il find out what software later il call him and find out and post up later,

I am very picky on who touches my car, he really knows what he is doing. When he mapped my celica nobody else would touch it they said they didnt know how to do it and Jay knew straight away. Apparantly there isnt a wasnt a cable available at the time to connect to celica ecu with it been an import so he had wires pushed into my port and made up his own cable while i waited and did an amazing job of mapping it.

I can definetly vouch for his knowledge and skills in mappping, for my 200 i got a run on dyno, remap, second run on dyno another tweak another run another tweak and a third and final run on dyno.

if you trust him thats ok, loads of folks ended up with rebuilds due to an open source mapping company that poped up in the midlands area, just don;t want you to get stung.
__________________
PM, Squirrels best friend, cream egg king and resident .org spam tart/Perv
Offline   Reply With Quote
Old 01 Jul 2010, 12:23 PM   #10 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

Quote:
Originally Posted by bugeye_bob View Post
I know Jay very well, we go back a few years I was around when he first ordered his rolling road, he was always mapping boats back then though.
LOL didnt know he was mapping boats before

I swear by him i first used him around 5 years ago and have always been pleased with results.
Offline   Reply With Quote
Old 01 Jul 2010, 05:12 PM   #11 (permalink)
Fresh Scooby
 
Join Date: Aug 2008
Posts: 2
Re: anybody intrested in a remap/dyno run

Quote:
Originally Posted by dukey1234 View Post
its a fair treck for me from barnsley south yorks but, i trust Jay the mapper so its worth it
not far for me mate only 1 1/2 hours
Offline   Reply With Quote
Old 01 Jul 2010, 09:47 PM   #12 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

well im in no rush but want to get mine mapped over the next month or so.
even if people just want dyno runs be good to see some of peoples cars which we hear so much about on here
Offline   Reply With Quote
Old 03 Jul 2010, 05:37 AM   #13 (permalink)
jd
Obsessed Scooby
Paid & Proud
 
jd's Avatar
 
Join Date: Mar 2005
Location: here
Posts: 6,414
Send a message via MSN to jd
Re: anybody intrested in a remap/dyno run

if you pay for the fuel and lodgings
__________________
blah blah blah
Offline   Reply With Quote
Old 03 Jul 2010, 09:15 AM   #14 (permalink)
Cool Scooby
 
dukey1234's Avatar
 
Join Date: Jul 2009
Location: barnsley SY
Posts: 247
Re: anybody intrested in a remap/dyno run

Quote:
Originally Posted by jd View Post
if you pay for the fuel and lodgings
Unfortunatly my good will ran out last weekend but always worth a try lol.
Offline   Reply With Quote
Old 03 Jul 2010, 09:17 AM   #15 (permalink)
jd
Obsessed Scooby
Paid & Proud
 
jd's Avatar
 
Join Date: Mar 2005
Location: here
Posts: 6,414
Send a message via MSN to jd
Re: anybody intrested in a remap/dyno run

wont be there then lol


had a dyno session a couple of weeks ago.
__________________
blah blah blah
Offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 03:00 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.