View Single Post
Old 24 Jun 2004, 11:13 PM   #6 (permalink)
Subie Gal
Regular Scooby
 
Subie Gal's Avatar
 
Join Date: Apr 2004
Location: Seattle WA - USA
Posts: 176
resets work well on the pre 01 setup

but not on the 01-newer

the ECU's differ and dont 'forget' much
you really need the correct program / data logger/ select monitor to clear the car properly...especially if you get a bad code. The new ECU will not 'just forget" and the code / check engine light will come back on.... (trust me, been there done that... still dealing with it! )


on the older GC body.. reset by disconnecting neg terminal (10-20mins should do)
reconnect
start the car but do not touch the gas pedal
let it idle for a bit

and there ya go....

Jamie
Offline   Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177