Simtec ECU's.... Anyone heard of them??
The new Simtek ecu's are now available through Enginetuner..
Specs are as follows
24 X 24 3D Fuel and ign maps
Closed loop boost control using the original solenoid
Closed loop Lambda
Closed loop idle control
Individual cylinder trims for Fuel and Ignition
0.25 degrees ignition resolution
Charge temperature ignition and fuel correction tables
MAP based load calculation - MAF not required
Adjustable Pressure and RPM breakpoints
Will utilise exisiting MAP Sensor for upto 1.2 bar or Any aftermarket version for boost beyond this level (Delco, Bosch etc)
2 switchable fuel, ignition and boost maps
A/C supported with auto shut off above defined throttle angle
Live mapping
Knock will flash CEL as the Apexi does
Gear shift light - uses CEL
Fuel and ignition based rev limiters
Supports water injection and water spray with automatic control from charge temp sensor , throttle sensor and map sensor...
We will be supporting the Impreza range from 93 -98 WRX and STI
Antilag will be available as a cost option for approx £150
Having had a very long session with the designer today he informs me that future developments will include a small display device similar to the Apexi Commander , more model coverage to take care of MY2000 - 2006 cars and gear based boost control for the whole range...
I've been told the Apexi's have dried up at the moment, so I think by the looks of it, these are the 'next' Apexi...
If anyone has heard of these, please can someone let me know?
|